Tension meters are things of past, but the tension gauge is the future. There is no fundamental difference between these two, and they serve the same purpose, but a tension gauge is much lighter, practical, smaller, cheaper and easier to use. The ATG Dial tension gauge 500g can be used to measure many things: valves, the tension of micro switches, electronic switches and other tensions. When testing tension, make sure that you use the active needle to dial the object that you want to measure by moving the object from its stationary state to wanted position. When performing this operation, try moving the objects as slow as you can because the slower you go, the more accurate the measuring will be. With this tension gauge, measuring can be performed clockwise but also counter clockwise with one condition: the active needle arm must be pointed toward the direction of the push or pull force. The ATG gauge has many good characteristics: everyone can learn to use it because it is very easy to operate and it has a stylish and practical design. There are two units that you can choose when measuring (N and g) and it is very small and compact.
1. High accuracy
2. Simple to test
3. Good packing
4. Exquisite outline
5. N and g two units to choose
Tension meter relay connections to apply pressure, electronic switches, micro-switches, valves, spring widening pressure, dial spindle pressure measurement equipment, automatic telephone equipment connections and pressure mechanical pressure armature, tape recorders buffer pressure point of contact pressure and other precision pressure, tension tests.
1. Simple to use
2. Refined appearance
3. Testing as long as needed to promote stylus test objects from the static position of the need to be mobile.
4. Tension along allows clockwise direction along an anti-clockwise test, but it always stylus arm and push in the direction of the vertical tension.
|Types||Max. measured value||Division value||Measuring range||Size (cm)||G.W. (kg)|
|Units : N||12 x 7 x3.5||0.25|
English Manual Download