1. CE Certificate
2. One year Warranty
3. Can connect to PC
4. 6 digits screen display
5. N , kg and lbs three units
The force gauge has advantages of high precision, easy operation and carry. What's more, it has kinds of testing modes, convenience for conner and it can store and input data to computer for statistical analysis as well as constitutes testers with different functions, combining with test-beds and clamp. Users can input local acceleration of gravity value to make test more precise.
1.High precision and high resolution.
2.Five testing modes and three display methods for selection----enhance testing efficiency to the maximum extent
3.N (Newton), kg (Kilogram) and lb (Pound) three measuring units for selection and conversion.
4.Setting function of gravity acceleration----User can input at your option the accurate value of gravity acceleration at the using place so as to make the testing and unit conversion be more accurate.
5.Function of peak value maintaining. Maintain the display of peak value until manual zero clearing.
6.Automatic peak function. Maintain the display of peak value for 2 seconds and then release automatically.
7.Max and min and comparison value can be set for statistic analysis. The buzzer will alarm if exceeding comparison value.
8.Data storage function. 896 testing values can be stored.
9.Data output function. The data can be input into computer through data line for various analyses.
10.Environmental protection. The device will automatically stop if no operation within 10 minutes.
11.High quality chargeable power supply. The charging voltage is avai-lable from 100V to 240V, which can accommodate most areas in domestic and at abroad. It has also protection functions for short circuit, leakage and overload.
12.2 sets mounting dimensions, it is applied for most testing platforms domestically and easy for users to install it to platform.
13.Special testing function of make-break ability of switch contact to make the make-break testing be more accurate.
14.6 digits large screen display.
15. Synchronous measuring soft ware can connect computer measuring, the computer display measuring graph and the detailed testing records, and can preserve, print, make analysis, input speed, area, displacement, and pressure. (Chosen function details see CD data.)
16. Contact control signal output setting comparative value, when the Measuring value is over comparative value, output signal control circuit Breaker's make-and-break, thus realize the function of stop electromotor, And control automatically; it is also can be used for realize other control Functions, for example input signal to plc to realize automatization. Also it can set signal output mode, for example output signal at some Measuring range. There is a jack on the side of apparatus can put one Side of connection line to secondary jack, and the other side in the jack on the testing machine which is produced by our company, thus it can realize function of stop electromotor automatically when the measuring Value is over comparative value. The comparative value can set by himself.
17. Negative phototropism function use key-press or apparatus is stressed, the negative photo tropism would light automatically, it will close negative phototropism if 10s non-operation; it also can press "setting" key 6 times ,enter 'light" condition, choose "NO" to close negative phototropism, chose "YES" to start the function automatically.
18. LCD overturn display press "print" key can make the value reverse 180°, convenience for looking the measuring value from different angle.
19. Reset quickly when system halted accidentally install reset key on the side, then press the key swith forcely can make power off.
20. Digit force gauge has many specifications for users' choosing, and customers can choose corresponding apparatus according to the force value of their measuring products. The measuring range should be 10%-100% of the full range, measuring department suggest not use less than 1% of the full range, so this apparatus shield the range. At the same time, press "zero setting" key to clear the weight of clamp befor the measurement.
Model specification sheet of force gauge with external sensor
|Peak load value||2000N||5000N||10KN||20KN||50KN||100KN||200KN||500KN|
|load division value||1N||1N||0.01KN||0.01KN||0.01KN||0.1KN||0.1KN||0.1KN|
|Unit||N / (KN), kg / (Mg or t), lbs (Klbs)|
|Data interface||Rs232 nine-hole socket|
|Power||rechargeable batteries, charger(charging voltage 100V-240V)|
|Sensor structure||S-tye or column sensor with high precision (extenal sensor)|
|Ambient temperature||5° C~35° C|
|Tansport temperature||-10° C~60° C|
|Working conditions||No hypocenter and corrosive medium|
|Gross weight||6 kg||9 kg||24 kg|
|Size||280 x 200 x 170 mm||310 x 260 x 190 mm|
|Model||Compressed clamp||Stretching clamp||Extended bar||Assistant socket||Computer line||Mounting screw||Manual||Inspection certificate||Charger||Software|
English Manual Download