U. S. Solid® 1/2" Electric Solenoid Valve 24VAC

was $42.99 Special Price $27.99
In stock
Estimated arrival: Country:

Postal Code:
Product Location:United States
Product Condition:New

The Electric Solenoid Valve 24VAC is suitable for both private and commercial establishments and it can be used to control air, gas and fuel.

The Electric Solenoid Valve 24VAC, comes from a well established manufacturer, U. S. Solid, and the valve is, as they say, normally closed (N/C). It is constructed with a durable brass body, two-way inlet and outlet ports with heat and oil resistant Viton gaskets, and one-half inch (1/2") NPT connections. It is suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, e.g., gasoline, kerosene, or diesel fuel. It can be used outdoors however, it is not designed to be used underwater. Customers can choose this general purpose valve for various occasions - DIY projects, various projects related to temperature, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or for home brewing. If you have any further questions, you can consult the text below. If that’s not enough, feel free to contact us.


Pipe Size:                                             1/2" (16 mm) flow aperture

Body Material:                                 Brass

Gasket / Diaphragm / Seal:          Viton

Operation Type:                               Semi-Direct Lift Valve

Operation Mode:                             Normally Closed

Electric Current:                                Alternating

Voltage:                                               24 volts

Voltage range:                                  + or – 10%

Power rating:                                     18 Watts

Pressure, Minimum:                       0 PSI (0 MPa)

Pressure, Maximum:                      145 PSI (1.0 MPa)

Operational pressure range; Air, Water, Gases: 0 to 101 PSI

Operation pressure range; oil:                                   0 to 72 PSI

Flow capacity:                    4.8 gallons per minute (GPM) of water at 60 oF with a pressure drop of 1 PSI

Flow value:                                         4.8 Cv

Temperature, Minimum:              14 degrees Fahrenheit (-10 degrees Celsius)

Temperature Maximum:              248 degrees Fahrenheit (120 degrees Celsius)

Manufactured in China by U.S. Solid. Model: USS2-00001. Quality assurance and/or conformity managed in accordance with standards:

ISO 9001:2000; GB/T 19001:2000; European EN61000-6-1:2001 and EN61000-6-3:2001.

Attention California Residents:

“WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.”

Write Your Own Review
You're reviewing:U. S. Solid® 1/2" Electric Solenoid Valve 24VAC
Your Rating

We ship it from Cleveland, Ohio for US customers, and only ship to the USA.

Total Shipping Time = Processing Time + Shipping Time

Processing Time:  1-2  Business Days
Shipping Time:  3-5 Business Days (USPS First Class)