1/4" NPT 24VDC Replacement Solenoid Valve for RO Water Systems

was $19.95 Special Price $12.50
In stock
Estimated arrival: Country:

Postal Code:
Product Location:United States
Product Condition:New
1/4" NPT 24VDC Replacement Solenoid Valve for RO Water Systems is available to buy in increments of 1

This is the USS-RSV00003 1/4” NPT Replacement Solenoid Valve for Reverse Osmosis (RO) Water Purifying Systems. When activated it opens the flow of tap water through your water purification system.

     Water purification systems can help to eliminate contaminants that can make you sick or affect the taste or feel of your water supply.
   In a Reverse Osmosis (RO) water purifying system, reverse osmosis is utilized to dissolve inorganic solids (such as salts) and removes them from a solution (such as water). This is achieved by using the household water pressure to push tap water through a semi permeable membrane. The membrane (which is about as thick as cellophane) allows only the water to pass through, not the impurities or contaminates. These impurities and contaminates are flushed down the drain. These systems use a lot of water, but they do remove all microbes that cause disease and a lot of chemicals. This is an extremely effective system for purifying water.
    The USS-RSV00003 is a 1/4” NPT Replacement Solenoid Valve for RO Water Purifying Systems. This solenoid valve is a 1/4” NPT direct acting normally closed valve that isolates the tap water and opens when the system is actuated or in FLUSH mode. This is a 2/2 valve which means it has 2 ports and 2 flow positions. Put simply, this valve either blocks or opens water flow from 1 inlet to 1 outlet. It uses DC24V for operation. They have prewired connections that make installation, maintenance, and control simple.
Being a U.S. Solid product, this replacement solenoid valve offers reliability and long life. We offer a One Year Warranty so you can buy with confidence.



U.S. Solid



U.S. Solid Model:


GTIN-12 (UPC):


Valve Type:

2 Position 2 Way



Operation/ Property:

Normally Closed


Seal: EPDM ; Body: PP

Cv Value:




Coil Class:

Class B 130


DC 24 V

Power Consumption:

DC 5 W

Applicable Media:


Working Pressure:

 0 – 8 Bar

Body Dimensions:

2.5” Long ;  1  3/16” Diameter;

Width from Port to Port 1.5”




Ships From Cleveland, Ohio, USA To Anywhere In The United States

Processing Time: 1 - 3 Days

Shipping Time: 2 - 4 Days

Write Your Own Review
You're reviewing:1/4" NPT 24VDC Replacement Solenoid Valve for RO Water Systems
Your Rating