40KW 30-80 KHz High Frequency Induction Heater Furnace LH-40AB
|Estimated arrival:|| Country:|
High Frequency Induction Heater, 30 KW, 30 - 80 KHz, work power: three phases, 380 V/50 Hz.
1. Adopts the latest MOSPET, IGBT power units and frequency conversion control techniques with high efficiency, low energy consumption and higher output power
2. With constant current and constant power control function to greatly optimize the heating process of metals, realize efficient and fast heating, and fully exert the superiority of the products
3. Power consumption is half of traditional electron tube high frequency induction heating equipments under same conditions
4. With 100% load design, can work in 24 hours without stop. Infrared temperature detector can be equipped to realize the automatic control of temperature, improve heating quality and simplify manual operation
5. With heating-insulating-cooling three stages function setting, the heating and insulating time required can be get to accommodate to the batched and repeated heating situations
6. With multiple status display of overflow, overvoltage, low water, phase failure and load malfunction, providing higher reliability and sustainability
7. Select power supply according to the power and frequency. The higher the frequency, the shallower the heating depth, and the lower the frequency, the better the diathermancy.
|Work Power||Three Phases; 380 V/ 50 Hz|
|Output Frequency||40 KW|
|Fluctuating Frequency||30 - 80 KHz|
|Output Current||400 - 1800 A|
|Timing||1 - 99s|
|Flow Rate of Cooling Water||0.08 - 0.16 Mpa 7.5 L/Min|
|Water Temp. Protection Point||40°C|
|Net Weight||Main Unit:36kg
|Dimension||Main Unit:600*255*540 mm
For more detail information, please refer to the English Manual
Kindly note: 1. The default power is 380 V/50 Hz, please leave us a message about the voltage of three phase in your country, and we will send the product with corresponding three phase voltage, thank you for your understanding.
2. We will send you a 1.5 m M8 copper tube, you can make the heating coil with it upon your need. If you want order more or other dimension heating coils, please contact us about it, the extra cost is USD 20.00.
3. We will send you a hose which is 10 meters long and 13mm in diameter
4. This machine can't be used with a plug, it need a wire to connect the machine to power line directly (the cross-sectional area of power line must be larger than 6 square milimeters.)
Total Shipping Time = Processing Time + Shipping Time
|Processing Time:||3-5 days|
|Shipping Time:||3-5 Business Days (Expedited Shipping, North America, most countries in Europe)|
|8-15 Business Days (Expedited Shipping, South America, some countries in Europe)|