96 holes Nitrogen Sample Concentrator NDK200-1A RT.+5~150 degree 200W

MSRP: $937.49
(You save $187.50 )
(No reviews yet) Write a Review
google product category:
Business & Industrial > Science & Laboratory > Laboratory Equipment
Item location:

Temperature Range: RT.+5~150 degree, 200W, Capacity:1 block, 96holes.

NDK200-1A 96 holes nitrogen concentrator is mainly used for enrichment of large-volume sample or preparation (such as drug screening, hormone analysis, liquid phase, and mass spectrometry in the analysis of sample preparation). Working principle: the nitrogen into the heated surface of the sample and make the solvent t evaporate and separated rapidly, thereby reaching the sample enrichment purpose without oxygen, keep the sample purer. Nitrogen concentrator instrument can concentrated dozens of samples simultaneously, saving time and high efficient, instead of rotary evaporation instrument.


1, The heater allows samples to be heated rapidly to the evaporation temperature, through the gas blow to the solution surface via needle at the same time, prompting rapid evaporation and concentration solution.

2, The gas chamber height can be adjusted, the length of standard gas needle is 80 mm.

3, Each blow needle can be controlled independently, can be blown, separate flow regulation, no waste of gas.

4, The entire system can be arranged in the ventilation cabinet when process concentration of toxic solvents,

5, Built in over-temperature protection device, automatic fault detection and alarm function.

6, LED display, temperature and time diminishing display, the operation is simple and convenient.

7, configured standard gas chamber and special adjustable bracket.

Technical Specification

Model NDK200-1A 96 holes nitrogen concentrator
Temperature range RT+5°C to 150°C
Heating time â‰?0min (From 40°C to 150°C)
Temperature accuracy (40~100°C) ±0.5°C
Temperature accuracy (100~150°C) ±1°C
Temperature uniformity (100°C) ±0.5°C
Blocks Quantity 1 piece
Temp. Display Accuracy 0.1
Time range 99h59min
Nitrogen flow 0-10L/min
Nitrogen pressure �.1MPa
power 200W
Dimensions 280x220x400 mm
Blocks Selection Refer to the "blocks replacement for NDK-1A Series"
English Manual Download

Blocks replacement for NDK-1A Series


Above price does not include any block and the flow regulating valve. Blocks and the flow regulating valve could be selected from below block list. If you want to order the blocks and the flow regulating valve, please refer to the price below and contact us.

Type Tube diameter Tubes Block size (mm) Price (USD)
DT16 0.2ml centrifugal tube 96 78 x 114 x 26 59.99
DT17 Plate(no holes) 96 hole enzyme plates 81 x 123 x 19 59.99
Flow regulating valve    68.99