Automatic Belt Webbing Hot Cutting Machine
|Estimated arrival:|| Country:|
The automatic cutting machine is suitable for cutting belt,webbing, ribbon. It can be used for both hot cutting and cold cutting.
The automatic cutting machine is suitable for cutting belt,webbing, ribbon. It is suitable for both hot cutting and cold cutting. The hot knife blade can seal the cut end. Hot cutting is suitable for Nylon webbing, Polyester webbing, braided webbing, etc.
1.High speed: It can cut 100~120 times per minute. (50mm long)
2.Accuracy: Cut-length is accurate, cut length can be set between 0.1-9999.9mm.
3.Cutting type: Both for cold cut and hot cut. Hot cut is suitable for materials that need hot sea, such as Nylon webbing, polyester webbing, etc.
4.Automatic operation: It works automatically only by length and quantity.
5.Automatic stopper: It stops automatically if materials run out during operation
6.Memory: length, quantity and speed which are preset will not be erased even if it is off.
7.Application:The cutting machine is suitable for cutting tubes, cable, webbing/ribbon/belt, small wire, sheet and film, etc.
8.High speed, high accuracy, designed for cutting non-adhesive materials.
3. Voltage: AC220V/50Hz & AC110V/60Hz
4. Power : 250W
5.Cut Length : 0.1-9999.9mm
6. Cut Width : 0-100mm
7. Cutting Thickness : 0-13mm
8. Dimension : L360*W300*H350MM
9.Net Weight : 28kg
Total Shipping Time = Processing Time + Shipping Time
|Processing Time:||3-4 days|
|Shipping Time:||3-5 Business Days (Expedited Shipping, North America, most countries in Europe)|
|8-15 Business Days (Expedited Shipping, South America, some countries in Europe)|