Automatic Wire Stripping Cutting Machine Computer controlled 0.1-4.5mm2 Used
|Estimated arrival:|| Country:|
|Product Location:||United States|
This is an used machine, 80% new.
Application: wire with 0.1 - 4.5 mm2 cross sectional area, such as PVC / Teflon / Silicone Cable / Wire Glass Fiber
Stripped Length: Thread 0-35mm, line end 0-15mm
Stripping method: full stripping, half stripping, middle stripping.
This automatic Wire Stripping and Cutting Machine is a great addition to any small to medium size production facility that works in the electrical, automotive, or appliance industries. This is a fully automated system run by a microcomputer with an easy to use Blue LCD display screen. 99 programs are available for a variety of wire stripping modes including middle stripping, partial stripping, and options for extra small or thin wires. The simple control panel allows for speed, stripping length, middle cuts, and output adjustments.
If A-C < A-S, the result is Full Stripping
If A-C > A-S, the result is Partial Stripping
You can set up the machine for a variety of wire types and sizes. Works with PVC, Teflon, Silicon Cable, and Glass Fiber wire insulation. The limitations for the cross area range are 0.1 – 4.5 mm2. The system is easily adjustable to prevent nicks and other wire damage.
Cutting length is 1-9999 mm with a stripped length of 0 – 35mm. Up to 10 middle stripping cuts are available with customizable spacing along the wire. The unit has a cutting tolerance level of +/- 0.002 mm*Wire Length for high accuracy reegardless of quantity, and a high quality 99% Tungsten, Steel alloy cutting blade for clean cuts on every piece of wire.
1 YEAR WARRANTY
|Power Supply||AC 110 V/ 60 Hz|
|Dimensions||390 x 350 x 255 mm|
|Display||In English and Chinese LCD display interface|
|Cutting Length||1 - 9999 mm|
|Cutting Tolerance||± 0.002 × L mm|
|Stripped Length||Max 35mm total, 15mm for Head or Tail Stripping Length|
|Intermediate Stripping Cut||10 Middle Stripping Options|
|Wire Cross Sectional Area||0.1 - 4.5 mm2 (AWG27# - AWG11#)|
|Appropriate Stripping Wire||PVC / Teflon / Silicone Cable / Fiberglass|
|Blade Material||99% Tungsten, Steel Alloy|
|Stripping speed (/ h)||L = 100mm, 3000-8000pcs / h (high yield)|
|Drive Mode||Four-wheel drive|
Processing: 1 - 2 Business Days
En route: 2 - 5 Business Days
(In Ohio warehouse now, continental US by Fedex ground, other area by USPS and additional charge may apply)