Deep Sea Engine Controller DSE501K

$65.99
In stock
SKU
JFAVR000037
Estimated arrival:From 08/11 to08/17
Product Location:China
Product Condition:New
Seller:Joyfay
Deep Sea Engine Controller DSE501K.

Deep Sea Engine Controller 501K

   The model 501K is a Manual Engine Control Module, which is designed to manually control the engine via a key switch on the front panel. The module is used to start and stop engine, indicating fault conditions, automatically shutting down engine and indicating engine failure by LED giving true first up fault annunciation.

DC Supply:  

9 to 33 V Continuous.   

Cranking Dropouts:  

Able to survive voltage dips during cranking.  This is achieved without the need for internal batteries.   

Alternator Input Range:  

15 - 305 V AC RMS 

Alternator Input Frequency: 

50 - 60 Hz at rated engine speed.   

Magnetic Input Range:  

0. 5 V to +/- 80 V  

Magnetic Input Frequency: 

2300Hz to 6000 Hz at rated engine speed.   

Start Relay Output:  

16 Amp DC at supply voltage.   

Run Relay Output:  

16 Amp DC at supply voltage.   

Alarm Output:  

1 Amp DC at supply voltage.   

Dimensions: 

72 X 72 X 118. 5 (Excluding Key-switch)   

Operating Temperature Range:  

-30 to +70°C  

Installation: 

Front panel mounting via suitable cut-out.  Retaining clips supplied.  Cable connections via locking plug and socket type connectors.  

Calibration:

Speed trip setting and meter calibration adjustment potentiometer are accessible from the rear of the module.  

Write Your Own Review
You're reviewing:Deep Sea Engine Controller DSE501K
Your Rating