Digital Vibration Meter Tester Vibrometer Gauge VM6360 40cm/s 20KHz

$268.39
In stock
SKU
JFGLT00003
Estimated arrival: Country:

Postal Code:
Product Location:China
Product Condition:New
Seller:Joyfay
Digital Vibration Meter Tester Vibrometer Gauge VM6360 40cm/s 20KHz is available to buy in increments of 1

A small portable vibration meter VM-6360. Most suitable for general vibration calculation. 

    The VM-6360 is very good for measuring general vibration on motors, compressors, pumps and any other kind of machinery. It utilizes a magnetic base and an external accelerometer in order to improve frequency response which allows a more constant vibration reading. It is built in accordance with the standard ISO 2954. With this device, you can listen for mechanical faults such as bearing defects and other. This is only possible because VM-6360 has an electronic stethoscope built in. The VM-6360 Vibration meter can display both metric and English units, making your job a lot easier, without having to translate measurements. The vibration velocity measures are shown in MM/S RMS. The VM-6360 is designed especially for easy and on site vibrating measurements of any kind of rotating machinery, commissioning, quality control and predictive maintenance purposes. It is very lightweight, small and easy to use. In general, many installations are far from perfect, and over time, this leads to added stress on critical parts that can get over-strained and cause heat generation, breakdowns or inefficiency. Monitoring vibrations on a mechanical device regularly will allow you to detect malfunctions or deterioration that may be harmful. By detecting these things on time, you will have time to repair certain parts in advance before their imbalance creates bigger damages. 

Application: used for measuring periodic motion, to check the imbalance and deflecting of moving machinery.

Specifically designed for present measuring various mechanical vibration. So as to provide the data for the quality control, run time and equipment upkeep.

Used the high-performance acceleration meter, realize the repetitiveness and accurate measurement.

It has the function of testing axle bearing situation.

One Year’s Warranty!

Specifications:

Acceleration p 10Hz-1 KHz     0.1-400m/ms²   0.3-1312ft/ms²

               10Hz-10 KHz    0.1-400m/ms²   0.3-1312ft/ms²

Velocity   rms   10Hz-1 KHz     0.1-400mm/s    0.004-16.0inch

Displacement p-p 10Hz-1 KHz     0.001-4.0mm    0.04-160 mil

Accuracy: <5

Auto power off

RPM (revolution): 5-100000r/min

Frequency: 0.1 to 10 KHz

Metric/imperial conversion

With RS232C interface

Max hold

Operating conditions: 0-+45°C (32°F-104°F), ≤90%RH

Power supply: 4x1.5V AAA (UM-4) battery

Battery indicator: low battery indicator

Dimensions: 124x62x30mm

Weight: 120g(not including battery)

Write Your Own Review
You're reviewing:Digital Vibration Meter Tester Vibrometer Gauge VM6360 40cm/s 20KHz
Your Rating

Total Shipping Time = Processing Time + Shipping Time

Processing Time: 3-4 days
Shipping Time: 3-5 Business Days (Expedited Shipping, North America, most countries in Europe)
 8-15 Business Days (Expedited Shipping, South America, some countries in Europe)