Dry Bath Incubator +5~150 Centigrade 2 Individually Controlled Blocks
|Estimated arrival:|| Country:|
DKT200-2A Dry bath incubator is controlled by micro-processor.It is widely used in cultivation, preservation and reaction of various samples.
The Dry Bath Incubator DKT200-2A is a prime example of how efficiency, productivity and design can be merged into one package, excellent for many laboratory experiments. The DKT200-2A is controlled by a microprocessor. Two independent modules can both be heated and kept thermostatic at the same time. As an alternative to the traditional water bath device, it shows precise temperature control. It displays great parallelism when talking about sample preparation. There are many other important features and parameters you should check out so be sure to scroll through the information supplied below.
|Temperature Control Range||RT + 5 ℃ ~ 150 ℃|
|Heating time||≤ 30 min (from 20 ℃ to 150 ℃ )|
|Temperature Control Accuracy @100-150 ℃||≤ ± 1 ℃|
|Temperature Control Accuracy @40-100 ℃||≤ ± 0.5 ℃|
|Block Temperature Discrepancy @40 ℃||0.3 ℃|
|Block Temperature Uniformity||≤ 0.5 ℃|
|Display Accuracy||0.1 ℃|
|Timing Range||99 h 59 min|
|Max. Temperature||150 ℃|
|Max. Power||400 W|
|Dimension (mm)||260 * 290 * 95|
|Block Selection||Refer to "Exchangeable blocks for DKT series "|
1. LCD display, simple interface.
2. High heating speed, uniform heating, accurate temperature control, high stability, low energy consumption and noise-free.
3. Built in temperature calibration function, automatic fault detection and buzzer alarm.
4. Built in over-temperature protection device, safe and reliable, prolong its usage life.
5. Product is compact-designed, only occupies very small space.
6. Various blocks for your choices, make it convenient to replace, clean and disinfect all kinds of test tubes.
7. Two independent modules can be heated and thermostatic at the same time.
Exchangeable blocks for DKT series
Notice: This machine cannot work without 2 blocks.
The price for this listing includes 2 blocks. The standard blocks are DT-07 and DT-14.
$66 for each blocks of Type DT01 - DT16, $89 for DT17/DT18.
By default, we will send 2 blocks(DT-07 and DT-14) to you, if you need other type of blocks, please leave us a message.
Total Shipping Time = Processing Time + Shipping Time
|Processing Time:||4 days|
|Shipping Time:||3-5 Business Days (Expedited Shipping, North America, most countries in Europe)|
|8-15 Business Days (Expedited Shipping, South America, some countries in Europe)|