Grain Hardness Tester AGW
|Estimated arrival:|| Country:|
AGW type grain hardness tester is specially used for testing the hardness of grains (wheat, rice and
etc.). The tester with advanced force metering technique is featured by high precision, high sensitivity,
high resolution, simplicity of operator, durability and reliability.
- Pressure for hardness testing: 0～ N（0～20 kg)
- Precision: ±5 N（±0.5 kg)
- Resolution: 0.1N（0.01 kg)
- The maximum diameter of grains: 18 mm
- Length × width × height: 140 mm×100 mm×250 mm
- Gross weight : 3 kg
How to use
1, When testing the small grains, please fix the grains with a clamp (preferably place it vertically), then slowly add pressure on
the top of the mandrel by rotating the handwheel. At the same time, the pressure load will be displayed on the meter and you
will get the maximum value of indicative pressure when the grain is crushed.
2, For re-test, press the button on the instrument dial to reset. If the pointer does not point to zero, rotate the round dial, and
begin to test when the pointer points to zero.
How to read
1.In the large dial, a small grid represents 0.01kg, and a large grid represents 0.1kg.
2.A grid of small dial represents 1kg.
3.Measurement result=the reading of small dial + the reading of large dial.
1.This instrument is applicable to be used in the environment of ambient temperature of -40 ℃ ~ +60 ℃ and relative humidity of not more than 80%.
2.Avoid bump and fall from affecting the precision in using. Wipe off the apparatus clean after using.
3.Various parts of equipment have been adjusted to the best condition. Do not dissemble the parts without permission.
Total Shipping Time = Processing Time + Shipping Time
|Processing Time:||3-5 days|
|Shipping Time:||3-5 Business Days (Expedited Shipping, North America, most countries in Europe)|
|8-15 Business Days (Expedited Shipping, South America, some countries in Europe)|