Digital Push Pull Gauge Force Gauge Meter External Sensor HF-20K
was $872.99 Special Price $582.00
|Estimated arrival:|| Country:|
Digital Push Pull Gauge Force Gauge Meter External Sensor HF-20K is available to buy in increments of 1
Digital Push Pull Force Gauge 20 KN 2000 N with external sensor.
1. CE Certificate
2. One year Warranty
3. Can connect to PC
4. 6 digits screen display
5. N , kg and lbs three units
The force gauge has advantages of high precision, easy operation and carry. What's more, it has kinds of testing modes, convenience for conner and it can store and input data to computer for statistical analysis as well as constitutes testers with different functions, combining with test-beds and clamp. Users can input local acceleration of gravity value to make test more precise.
1.High precision and high resolution.
2.Five testing modes and three display methods for selection(enhance testing efficiency to the maximum extent).
3.N(Newton),kg (Kilogram) and Ib (Pound) three measuring units for selection and conversion.
4.Setting function of gravity acceleration----User can input at your option the accurate value of gravity acceleration at the using place so as to make the testing and unit conversion be more accurate.
5.Function of peak value maintaining. Maintain the display of peak value until manual zero clearing.
6.Automatic PEAK function: can set up automatic PEAK time, from 1-9999 seconds.
7.Max. and min. and comparison value can be set for statistical analysis. The buzzer will alarm if exceeding comparison value.
8.Data storage function. 447 testing values can be stored.
9. Data output function. The data can be input into computer through data line for various analyses.
10.Environmental protection. The device will automatically stop if no operation within 10 minutes. If the automatic shutdown is set to 0, the instrument will not shut down.
11.High quality chargeable power supply. The charging voltage is available from 100V to 240V, which can accommodate most areas in domestic and at abroad. It has also protection functions for short circuit, leakage and overload.
12.Special testing function of make-break ability of switch contact to make the make-break testing be more accurate.
13.6 digits large screen display.
14.Low battery detection shutdown, when the battery is running low, the instrument will automatically put-off, it can prevent the low battery caused by Inaccurate measurement.
|Peak load value||1000N||2000N||3000N||5000N||10KN||20KN||30KN||50KN||100KN||200KN||300KN||500KN||1000KN||2000KN|
|load division value||1N||0.01KN||0.1KN||1KN|
|Sensor structure||Inner / External Sensor||External sensor|
|Data interface||RS 232 nine-hole socket|
|Power||7.2V 1.2Vx6 NiMH batteries|
|Charging time||4~6 hours|
|The battery of continuous use of time||About 15 hours|
|Battery Life||>=300 times|
|Charger||Input: AC 220V 50HZ Output: DC 10V 300mA|
|Working temperature||5C ~ 35C|
|Relative humidity||15% ~ 80%RH|
|Working conditions||No hypocenter and corrosive medium|
|Model||Computer line||Manual||Inspection certificate||Charger||Software|
Compressing / Stretching clamps are NOT included in this item, please contact us if you need them, also please be aware that extra price and shipping cost will be applied!English Manual
Write Your Own Review
Total Shipping Time = Processing Time + Shipping Time
|Processing Time:||4-5 days|
|Shipping Time:||3-5 Business Days (Expedited Shipping, North America, most countries in Europe)|
|8-15 Business Days (Expedited Shipping, South America, some countries in Europe)|