Digital 50 N Push Pull Gauge Gage Force Gauge Tester Meter HF-50
|Estimated arrival:|| Country:|
This is a digital force gauge that is a tool that tests the strength of objects.
By purchasing this tool, you will have a high performance gauge that will serve you for a long time. The HF 50 series of digital force gauge devices is very much skilled for establishing accurate and precise measurements that are needed when it comes to testing the functionality of a certain structure, object or part. The HF 50 digital force gauge can also find appliances in quality testing operations that can later point the strength of a certain object or part. This is also a very capable device that can be used for checking push or pull force (compression or tension) of many different objects. With this model of force gauge, you can also perform rudimentary compression tests and tension tests. All of the operations with this gauge are easy to perform, simple, fast and done by a small hand held device. The modern structure and design of the HF 50 t force gauge will make you fall in love with it, as it is very useful and yet very small and practical. The digital side of this gauge is also very appealing as it can show results in different units, and it can also store data of previous measurements.
1. CE Certificate
2. One year Warranty
3. Can connect to PC
4. 6 digits screen display
5. N , kg and lbs three units
The force gauge has advantages of high precision, easy operation and carry. What's more, it has kinds of testing modes, convenience for conner and it can store and input data to computer for statistical analysis as well as constitutes testers with different functions, combining with test-beds and clamp. Users can input local acceleration of gravity value to make test more precise.
1.High precision and high resolution.
2.Five testing modes and three display methods for selection(enhance testing efficiency to the maximum extent).
3.N(Newton),kg (Kilogram) and Ib (Pound) three measuring units for selection and conversion.
4.Setting function of gravity acceleration----User can input at your option the accurate value of gravity acceleration at the using place so as to make the testing and unit conversion be more accurate.
5.Function of peak value maintaining. Maintain the display of peak value until manual zero clearing.
6.Automatic PEAK function: can set up automatic PEAK time, from 1-9999 seconds.
7.Max. and min. and comparison value can be set for statistical analysis. The buzzer will alarm if exceeding comparison value.
8.Data storage function. 447 testing values can be stored.
9. Data output function. The data can be input into computer through data line for various analyses.
10.Environmental protection. The device will automatically stop if no operation within 10 minutes. If the automatic shutdown is set to 0, the instrument will not shut down.
11.High quality chargeable power supply. The charging voltage is available from 100V to 240V, which can accommodate most areas in domestic and at abroad. It has also protection functions for short circuit, leakage and overload.
12.Special testing function of make-break ability of switch contact to make the make-break testing be more accurate.
13.6 digits large screen display.
14.Low battery detection shutdown, when the battery is running low, the instrument will automatically put-off, it can prevent the low battery caused by Inaccurate measurement.
|Peak load value||2N||3N||5N||10N||20N||30N||50N||100N||200N||300N||500N|
|load division value||0.001N||0.01N||0.1N|
|Sensor structure||Inner sensor|
|Power||7.2V 1.2VX6 NiMH batteries|
|Data interface||RS 232 nine-hole socket|
|The battery of continuous use of time||About 15 hours|
|Battery Life||>=300 times|
|Charger||Input:AC 220V 50HZ Output:DC 10V 300mA|
|Working conditions||No hypocenter and corrosive medium|
|Model||Extended bar||Computer line||Mounting screw||Manual||Inspection certificate||Charger||Software|
Compressing / Stretching clamps are NOT included in this item, please contact us if you need them, also please be aware that extra price and shipping cost will be applied!
Total Shipping Time = Processing Time + Shipping Time
|Processing Time:||4-5 days|
|Shipping Time:||3-5 Business Days (Expedited Shipping, North America, most countries in Europe)|
|8-15 Business Days (Expedited Shipping, South America, some countries in Europe)|