Digital 500N Push Pull Force Meter Gauge Tester HF-500

was $183.99 Special Price $122.50
In stock
SKU
JFFG00008
Estimated arrival: Country:

Postal Code:
Product Location:China
Product Condition:New
Seller:Joyfay

This device  is used for testing the strength of objects. This is our digital force gauge with an inner sensor.  

 Summary

   This is a very high quality device with a modern design that guarantees long time use. The HF-500 digital force gauge is a very capable device that can establish very accurate measurements which are needed when testing a functionality of a certain object. This digital force gauge can also be used for quality testing in order to establish knowledge of some object’s or part’s strength. The HF-500 models can measure tension or compression (pull or push) of a certain object. This model is designed for hand held use and it can perform rudimentary compression and tension tests that go up to 500N.This force gauge can perform very accurate measurements in the region of 500N max. Not only that it is very accurate, but the HF series model 500 is also very simple and easy to use. This model features a compact structure design that is applied in order to make the gauge easy to carry and use whenever needed. This digital force gauge displays the measurements on the screen but it can also show more useful information. This force testing device can be used in electric industry, in digital field, textile industry, light industry, for testing automobile parts, ignition systems etc… It is important that you read the manual before using this device in order to understand all of its features.  

Highlight

1. CE Certificate 
2. One year Warranty 
3. Can connect to PC 
4. 6 digits screen display 
5. N , kg and lbs three units

The force gauge has advantages of high precision, easy operation and carry. What's more, it has kinds of testing modes, convenience for conner and it can store and input data to computer for statistical analysis as well as constitutes testers with different functions, combining with test-beds and clamp. Users can input local acceleration of gravity value to make test more precise.

Characteristic

1.High precision and high resolution.
2.Five testing modes and three display methods for selection(enhance testing efficiency to the maximum extent).
3.N(Newton),kg (Kilogram) and Ib (Pound) three measuring units for selection and conversion.
4.Setting function of gravity acceleration----User can input at your option the accurate value of gravity acceleration at the using place so as to make the testing and unit conversion be more accurate.
5.Function of peak value maintaining. Maintain the display of peak value until manual zero clearing.
6.Automatic PEAK function: can set up automatic PEAK time, from 1-9999 seconds.
7.Max. and min. and comparison value can be set for statistical analysis. The buzzer will alarm if exceeding comparison value.
8.Data storage function. 447 testing values can be stored.
9. Data output function. The data can be input into computer through data line for various analyses.
10.Environmental protection. The device will automatically stop if no operation within 10 minutes. If the automatic shutdown is set to 0, the instrument will not shut down.
11.High quality chargeable power supply. The charging voltage is available from 100V to 240V, which can accommodate most areas in domestic and at abroad. It has also protection functions for short circuit, leakage and overload.
12.Special testing function of make-break ability of switch contact to make the make-break testing be more accurate.
13.6 digits large screen display.
14.Low battery detection shutdown, when the battery is running low, the instrument will automatically put-off, it can prevent the low battery caused by Inaccurate measurement.

Specifications

Model 2 3 5 10 20 30 50 100 200 300 500
Peak load value 2N 3N 5N 10N 20N 30N 50N 100N 200N 300N 500N
0.2kg 0.3kg 0.5kg 1kg 2kg 3kg 5kg 10kg 20kg 30kg 50kg
0.45Lb 0.65Lb 1.1Lb 2.2Lb 4.5Lb 6.5Lb 11Lb 22Lb 45Lb 65Lb 110Lb
load division value 0.001N 0.01N 0.1N
0.0001kg 0.001kg 0.01kg
0.0001Lb 0.001Lb 0.01Lb
Sensor structure Inner sensor
Accuracy +/-0.5%
Power 7.2V  1.2VX6  NiMH batteries
Data interface RS 232 nine-hole socket
Charging time 4~6hours
The battery of continuous use of time About 15 hours
Battery Life >=300 times
 Charger Input:AC 220V 50HZ    Output:DC 10V 300mA
Working temperature 5C~35C
Transport temperature -10C~60C
Relative humidity 15%~80%RH
Working conditions No hypocenter and corrosive medium

Packing List

Model Extended bar Computer line Mounting screw Manual Inspection certificate Charger Software
HF-2 1 1 4 1 1 1 1
HF-5 1 1 4 1 1 1 1
HF-10 1 1 4 1 1 1 1
HF-20 1 1 4 1 1 1 1
HF-50 1 1 4 1 1 1 1
HF-100 1 1 4 1 1 1 1
HF-200 1 1 4 1 1 1 1
HF-500 1 1 4 1 1 1 1
HF-1000 1 1 4 1 1 1 1

Notice:

Compressing / Stretching clamps are NOT included in this item, please contact us if you need them, also please be aware that extra price and shipping cost will be applied!

English Manual

Write Your Own Review
You're reviewing:Digital 500N Push Pull Force Meter Gauge Tester HF-500
Your Rating

Total Shipping Time = Processing Time + Shipping Time

Processing Time:  4-5 days
Shipping Time:  3-5 Business Days (Expedited Shipping, North America, most countries in Europe)
  8-15 Business Days (Expedited Shipping, South America, some countries in Europe)