Manual Hydraulic Test Stand For Push Pull Force Gauge ALR
|Estimated arrival:|| Country:|
With this test stand ,you can simplifies the operation process and make the operation stable. This machine can be combined with different fixtures.
ALR Hydraulic model test stand is designed for HF series of push pull force gauges which are used in manual operation. You can use large hydraulic jacks to
realize big load force test. The machine simplifies the operation process and makes the operation much stable. It can be combined with different fixtures in
various compressive load test.
|Compress chamber||200 mm||220 mm||200 mm||145 mm||290 mm|
|Stretching chamber||150 mm||150 mm||230 mm||270 mm||160 mm|
|Effective stroke||90 mm||125 mm||125 mm||145 mm||160 mm|
|Dimensions||190×190×840 mm||248×248×1050 mm||310×310×1280 mm||310×310×1350 mm||370×370×1510 mm|
|Net weight||30 kg||42 kg||92 kg||102 kg||240 kg|
1. The test stand can be ordered according to user's request of specifications.
2. The force gauge shown in picture is not included and it is can be ordered separately
3. Please install sensor and jack in the middle when installing the machine. When using it, the direction of push pull force should be in the middle
of the machine and perpendicular to the machine.
1. In testing, people should wear protecting masks and gloves , in order to prevent splashing substances produced during the test.
2. Don't use the damaged or curved fixtures. Otherwise, something tested may drop. So be careful of yourself.
3. Do not exceed the range of the sensor. Too much load can lead to accident.
Total Shipping Time = Processing Time + Shipping Time
|Processing Time:||4-5 days|
|Shipping Time:||3-5 Business Days (Expedited Shipping, North America, most countries in Europe)|
|8-15 Business Days (Expedited Shipping, South America, some countries in Europe)|