Barcol Impressor Hardness Tester Meter Sclerometer for Aluminum 934-1
|Estimated arrival:|| Country:|
A machine used for the purpose of testing the hardness of metal, aluminum in most cases, or any aluminum alloys.
934-1 Barcol Impressor Hardness Tester is a truly unique device capable of accurately testing the hardness of aluminum, either in its pure or alloy forms. It is rather simple to use since it only requires the use of one hand, and it can test the hardness level on sight. It is widely used in order to test either very soft or extremely hard aluminum alloys; in fact, it has the ability to test any piece of metal, provided that its thickness is greater than 0.8mm. Once the tests are finished, the results may be converted to HB, HR, HV and HW with ease by using the conversion table. The contents of the package are one tester, two spare indenters, one low and one high standard hardness block, a calibration wrench, one leg and, of course, a case in which you carry the equipment. The name of the model is 934-1, it has a testing range of 0 - 100 HBa (equivalent to 25 - 145 HBW), the resolution of 0.5 HBa, and its weight is only half a kilo.
- Easy to Use
Single hand operation, easy to use, high efficiency, able t make test at any site.
- High Sensitivity
Barcal Impressor has 100 graduations. Its sensitivity is much higher than the Webster hardness tester.
- Wide Testing Range
Used to test from very soft pure aluminum to very hard aluminum alloys.
- Less Thickness Requirement
It can test on any workpieces with thickness greater than 0.8 mm.
- No Supporting Required
It can test from only one side of the workpiece It is unnecessary to move or support the workpiece. It is used to test very large and thick workpieces and assembly parts.
- Easy Conversion
The test results can be converted to HB, HR, HV and HW easily through the conversion table.
- High Quality Indenter
The indenter has very high hardness, long service life and good interchangeability.
|Product Name||Barcol Impressor|
|Testing Range||0 - 100 HBa (equivalent to 25 - 145 HBW)|
|Indication Error||± 2 HBa (42-48 HBa)|
|± 1 HBa (81-88 HBa)|
|Repeatability Error||± 2 HBa (42-48 HBa)|
|± 1 HBa (81-88 HBa)|
More Information please refer to the Manual Instruction of 934-1
- 1 x Tester
- 2 x Spare Indenters
- 1 x Standard Hardness Block (high)
- 1 x Standard Hardness Block (low)
- 1 x Calibration Wrench
- 1 x Leg
- 1 x Carrying Case
Total Shipping Time = Processing Time + Shipping Time
|Processing Time:||5-6 days|
|Shipping Time:||3-5 Business Days (Expedited Shipping, North America, most countries in Europe)|
|8-15 Business Days (Expedited Shipping, South America, some countries in Europe)|