New Nitrogen Sample Concentrator NDK200-1 RT.+5~150 degree 200W
|Estimated arrival:|| Country:|
An efficient and versatile nitrogen sample concentrator that accept a large number of samples, the NDK200-1 features a powerful heater that causes fast heating of samples and efficient evaporation. The devices incorporate twelve gas chambers and twelve gas needles, which can all be individually adjusted to suit different height test tubes. There is also a control switch for each separate gas chamber, so that there is no gas leakage. Nitrogen flow can be set from 0 to 10 L/min, at pressures under 0.1 MPa. In order to ensure a stable working temperature the device is equipped with an integrated overheating alert system, which sounds an alarm if the temperature of the samples surpasses the parameters set by the user. The NDK200-1 nitrogen sample concentrator also features an LED display for accurate tracking of the temperature and time passed. The accuracy and uniformity of the temperature are within ±0.5°C.
1, The heater allows samples to be heated rapidly to the evaporation temperature, through the gas blow to the solution surface via needle at the same time, prompting rapid evaporation and concentration solution.
2, Gas needle position in the gas chamber can be changed, suitable for various kinds of tubes.
3, The gas chamber height can be adjusted, the length of standard gas needle is 150mm.
4, Equiped with 12 gas control switch ,no waste of gas.
5, The entire system can be arranged in the ventilation cabinet when process concentration of toxic solvents,
6, Built in over-temperature protection device, automatic fault detection and alarm function.
7, LED display, temperature and time diminishing display, the operation is simple and convenient.
8, configured standard gas chamber and special adjustable bracket.
|nitrogen concentrator||nitrogen concentrator|
|Temperature range||RT+5°C to 150°C|
|Heating time||≤30min (from 40°C to 150°C)|
|Temperature accuracy (40~100°C)||±0.5°C|
|Temperature accuracy (100~150°C)||±1°C|
|Temperature uniformity (100°C)||±0.5°C|
|Blocks Quantity||1 pieces||2 pieces|
|Dimensions||265x200x500 mm||280x220x500 mm|
|Blocks Selection||Refer to the "blocks replacement for NDK Series"|
Blocks replacement for NDK Series
Above price does not include any block and the flow regulating valve. Blocks and the flow regulating valve could be selected from below block list. If you want to order the blocks and the flow regulating valve, please refer to the price below and contact us.
|Type||Tube diameter||Tubes||Block size (mm)||Price (USD)|
|DT13A||0.5 ml centrifugal tube||24||95.5X76.5X50||59.99|
|DT14||1.5 ml centrifugal tube||24||95.5X76.5X50||59.99|
|DT15||2.0 ml centrifugal tube||24||95.5X76.5X50||59.99|
|DT17||Plate(no holes)||96 hole enzyme plates||78X114X26||59.99|
|Flow regulating valve||68.99|
Total Shipping Time = Processing Time + Shipping Time
|Processing Time:||4-5 days|
|Shipping Time:||3-5 Business Days (Expedited Shipping, North America, most countries in Europe)|
|8-15 Business Days (Expedited Shipping, South America, some countries in Europe)|