Pneumatic Engraving Machine Jewelry Engraver Double Ended

was $357.49 Special Price $220.00
In stock
SKU
JFPEM00002
Estimated arrival: Country:

Postal Code:
Product Location:United States,China
Product Condition:New
Seller:Joyfay

This is a Pneumatic Engraving Machine that is an automated machine that will let you do your job a lot easier.

Single-ended: 

Description

This pneumatic engraver is flexible enough to work on a variety of materials such as metal, wood, and jewelry making it applicable for jewelry making, metal working, crafting, and wood working to name a few. The inclusion of a foot pedal leaves both hands free while you are working while the adjustable air pressure and rotation cuts down on fatigue and shortens manufacturing and production times. You have the freedom to set the pressure and speed you need, and the ability to switch between multiple hand pieces. Create any symbols, characters, or designs you can think of. You are only limited by your imagination.

**NO burrs/shanks/bits included**

**Requires Compressed Air 1.4 cfm at 45 psi minimum (40 liters per minute at 3 bar minimum).**

Directions for Use

To avoid the damage of pressure meter and pressure reducing valve caused by the excess pressure, please turn off the air pressure valve knob and the engraver handle switch first.  
Connect to the power, turn on (the indictor will turn red).
Turn the switch to position 1 or 2 depending upon which hand piece is in use.
Adjust the air pressure and rotation speed, while holding the engraver handle. Step on the foot pedal to the maximum; adjust the air pressure knob gradually to 1.5-2kg p cm², then adjust the rotation speed knob. Keep adjusting the air pressure and rotation speed knob together to achieve the maximum impact force for the hand piece, then press the air pressure knob.
Release the foot pedal and install the hand piece.
Please turn off the power switch, turn on the rotation handle switch and adjust the air pressure knob before you switch between the hand pieces.
Use the foot pedal to adjust speed.

Specifications

Power Supply AC 220 V, 50 Hz / AC 110 V, 60 Hz (Optional )
Power Consumption 60 W
Rotating Speed 100-4000 rmp
Air Pressure 0 - 3 kg / cm2
Weight About 5 kg

Operation

  • To avoid the damage of pressure meter and pressure reducing valve caused by the excess pressure, please turn off the air pressure valve knob and the graver handle switch firstly.
  • Connect to the power, turn on the On/Off switch (the indictor will turn red)
  • Turn the switch to position 1 or 2.
  • Adjust the air pressure and rotation speed, while holding the engraver handle. Step on the foot pedal to the maximum; adjust the air pressure knob gradually to 1.5-2kg pcm2, then adjust the rotation speed knob. Keep adjusting the air pressure and rotation speed knob together to achieve the maximum impact force for the engraving handle, then press the air pressure knob.
  • Release the foot pedal and the engraving handle will stop working. Install the graver.
  • To switch the use of the big and small engraving handle, turn the switch handle to position 2 and 1.
  • Please turn off the power switch, turn on the rotation handle switch and adjust the air pressure knob before you switch the engraving handles.
  • In operation, adjust the speed of foot pedal to control the impact force stably. 

More details, please refer to the English Manual

Write Your Own Review
You're reviewing:Pneumatic Engraving Machine Jewelry Engraver Double Ended
Your Rating

Total Shipping Time = Processing Time + Shipping Time

Processing Time:  1-3 Business Days
Shipping Time:  2-4 Business Days (Expedited Shipping, North America, most countries in Europe)
  8-15 Business Days (Expedited Shipping, South America, some countries in Europe)