U.S. SOLID 1/8" Brass Electric Solenoid Valve 24V DC Viton Seal N.C.

was $19.99 Special Price $13.99
Out of stock
Estimated arrival: Country:

Postal Code:
Product Location:United States
Product Condition:New

1/8" Solenoid Valve by U.S. Solid; Brass w Viton Seal, Normally Closed, Direct Lift, Electric 24V DC


U. S. Solid normally closed (N/C) electric solenoid valve is constructed with a brass body, two-way inlet and outlet ports with one-eighth inch (1/8") female threaded (NPT) connections, and Viton gasket. Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 21 cst), oils and hydrocarbons, e.g., gasoline, kerosene, or diesel fuel. May be used outdoors. Not for use underwater. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, water exchange for aquarium, air horn, or bleeding moisture from an air tank.


Size:                                                       1/8" (2.5 mm) flow aperture

Body:                                                    Brass

Gasket / Diaphragm / Seal:          Viton

Operation Type:                               Direct Lift Valve

Operation Mode:                             Normally Closed

Electric Current:                                Direct

Voltage:                                               24 volts

Voltage range:                                  + or – 10%

Power rating:                                     4.8 Watts

Pressure, Minimum:                       0 PSI (0 MPa)

Pressure, Maximum:                      145 PSI (1.0 MPa)

Operational pressure range; Air, Water, Gases: 0 to 101 PSI

Operation pressure range; oil:                                   0 to 72 PSI

Flow capacity:                    0.23 gallons per minute (GPM) of water at 60 oF with a pressure drop of 1 PSI

Flow value:                                         0.23 Cv

Temperature, Minimum:              23 degrees Fahrenheit (-5 degrees Celsius)

Temperature, Maximum:             176 degrees Fahrenheit (80 degrees Celsius)

Manufactured in China by U.S. Solid. Model: USS2-00085.Quality assurance and/or conformity managed in accordance with standards:

ISO 9001:2000; GB/T 19001:2000; European EN61000-6-1:2001 and EN61000-6-3:2001.

Attention California Residents:

“WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.”

Write Your Own Review
You're reviewing: U.S. SOLID 1/8" Brass Electric Solenoid Valve 24V DC Viton Seal N.C.
Your Rating

We ship it from Cleveland, Ohio for US customers, and only ship to the USA.

Total Shipping Time = Processing Time + Shipping Time

Processing Time:  1-2  Business Days
Shipping Time:  3-5 Business Days (USPS First Class)