U.S. SOLID 1" Stainless Steel Electric Solenoid Valve 12VDC N.C.
|Estimated arrival:|| Country:|
|Product Location:||United States|
U. S. Solid normally closed (N/C) electric solenoid valve is constructed with a high-quality stainless steel body, two-way inlet and outlet ports with heat and oil resistant Viton gaskets, and one inch (1") female threaded (NPT) connections. Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, e.g., gasoline, kerosene, or diesel fuel. May be used outdoors. Not for use underwater. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or to control flow of propane gas.
Pipe Size: 1" (25 mm) flow aperture
Body Material: Stainless Steel
Gasket / Diaphragm / Seal: Viton
Operation Type: Semi-Direct Lift Valve
Operation Mode: Normally Closed
Electric Current: Direct
Voltage: 12 volts
Voltage range: + or – 10%
Power rating: 18 Watts
Pressure, Minimum: 0 PSI (0 MPa)
Pressure, Maximum: 145 PSI (1.0 MPa)
Operational pressure range; Air, Water, Gases: 0 to 101 PSI
Operation pressure range; oil: 0 to 72 PSI
Flow capacity: 12 gallons per minute (GPM) of water at 60 oF with a pressure drop of 1 PSI
Flow value: 12 Cv
Temperature, Minimum: 14 degrees Fahrenheit (-10 degrees Celsius)
Temperature, Maximum: 248 degrees Fahrenheit (120 degrees Celsius)
Manufactured in China by U.S. Solid. Model: USS2-00076. Quality assurance and/or conformity managed in accordance with standards:
ISO 9001:2000; GB/T 19001:2000; European EN61000-6-1:2001 and EN61000-6-3:2001.
We ship it from Cleveland, Ohio for US customers, and only ship to the USA.
Total Shipping Time = Processing Time + Shipping Time
|Processing Time:||1-2 Business Days|
|Shipping Time:||3-5 Business Days (USPS First Class)|