Dear valued customers,

Thank you for ordering from us. Due to high volume of orders, we are very sorry to notify that cosplay costume orders placed after Oct 6th can't be guaranteed to reach before Halloween. But for cosplay in stock, it can reach you within 3-8 business days, Please check this link for cosplay in stock.

Happy Halloween!

Best Regards

Joyfay.com

U. S. Solid® 3/4" Electric Solenoid Valve 24VDC

was $45.99 Special Price $35.55
In stock
SKU
JFSV00061
Estimated arrival: Country:

Postal Code:
Product Location:United States
Product Condition:New
Seller:Joyfay

The Electric Solenoid Valve 24VDC is yet another valve from our trusted manufacturers U. S. Solid. The description will provide more details.

The Electric Solenoid Valve 24VDC is most certainly a stable, durable and reliable piece of equipment. All U. S. Solid products we have featured here, at JoyFay, are normally closed (N/C). Also, all valves are constructed with a durable brass body. This one, however, has two-way inlet and outlet ports which are both heat and oil resistant Viton gaskets. It also has a three-quarter inch (3/4") NPT connection. This valve is suitable to use with hot or cold water, gas, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, e.g. gasoline, kerosene, or other diesel fuels - just like any other U. S. Solid product. This particular valve is designed to be used outdoors and it is not meant for use underwater. You can chose this general purpose valve for various reasons. To get better acquainted with it, take a good look at the picture above and go through these specifications.

Description:

U. S. Solid normally closed (N/C) electric solenoid valve is constructed with a durable brass body, two-way inlet and outlet ports with heat and oil resistant Viton gaskets, and three-quarter inch (3/4") female threaded (NPT) connections. Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, e.g., gasoline, kerosene, or diesel fuel. May be used outdoors. Not for use underwater. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or to control flow of propane gas.

Specifications:

Pipe Size:                                             3/4" (20 mm) flow aperture

Body Material:                                      Brass

Gasket / Diaphragm / Seal:                  Viton

Operation Type:                                   Semi-Direct Lift Valve

Operation Mode:                                  Normally Closed

Electric Current:                                   Direct

Voltage:                                               24 volts

Voltage range:                                     + or – 10%

Power rating:                                      18 Watts

Pressure, Minimum:                           0 PSI (0 MPa)

Pressure, Maximum:                          145 PSI (1.0 MPa)

Operational pressure range; Air, Water, Gases: 0 to 101 PSI

Operation pressure range; oil:                                   0 to 72 PSI

Flow capacity:                                       7.6 gallons per minute (GPM) of water at 60 oF with a pressure drop of 1 PSI

Flow value:                                           7.6 Cv

Temperature, Minimum:                       14 degrees Fahrenheit (-10 degrees Celsius)

Temperature, Maximum:                      248 degrees Fahrenheit (120 degrees Celsius)

Manufactured in China by U.S. Solid. Model: USS2-00061. Quality assurance and/or conformity managed in accordance with standards:

ISO 9001:2000; GB/T 19001:2000; European EN61000-6-1:2001 and EN61000-6-3:2001.

Attention California Residents:

“WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.”

Write Your Own Review
You're reviewing:U. S. Solid® 3/4" Electric Solenoid Valve 24VDC
Your Rating

We ship it from Cleveland, Ohio for US customers, and only ship to the USA.

Total Shipping Time = Processing Time + Shipping Time

Processing Time:  1-2  Business Days
Shipping Time:  3-5 Business Days (USPS First Class)